How to choose a straightener and iron: make a beautiful hairstyle

Owners of long hair can calculate how much time they spend to bring her hair in order. To achieve the result is not so easy. It takes a lot of time just to make the hair lay down, not to mention creating complex styling. In such situations, come to the aid of numerous curling, ironing and straighteners for hair. Today presented devices from different manufacturers that facilitate the lives of girls.


content


  1. How to choose a coating for plates ironing hair
  2. What rectifier to choose - we decide on the size of the plate ironing
  3. What is the heating temperature in the iron for hair
  4. What else you need to consider when choosing a hair straightener
  5. Which manufacturers are most popular

choose a rectifier


How to choose a coating for the plates ironing hair?

The most important element of the hair iron are the heating plates. Between them skipped curls, which are further straightened under the influence of temperature. The effectiveness of styling and safety for the hair depends on the material of the plates.

Plates on older models of ployek were made without special coatings. They are made of aluminum or another metal that provides thermal conductivity. Today, they are gradually being supplanted by rectifiers with plates made from tourmaline, ceramics or titanium.

Metal Rectifiers

Metal Rectifiers

These are simple and common models that today belong to the budget segment. The main problem of such devices is that they strongly cling and destroy hair. It is dangerous for brittle and thin hair that can permanently deteriorate.

Such models are sold at affordable prices, but they can not be advised to girls with weak hair. They are not suitable for frequent use, because they dry out curls.

Virtues

  • simplicity of design;

  • affordable cost.

disadvantages

  • hazard to hair structure.

Ceramic Rectifiers

Ceramic Rectifiers

Ceramic plates are much more careful with hair. This material evenly distributes heat, and the hair does not burn to the plates. Girls use them regularly without fear for their hair.

Ceramics easily glides through the hair, so straightening does not cause difficulties. But you need to carefully treat the material, because over time the surface cracks.

Virtues

  • uniform distribution of heat;

  • gentle attitude to the hair.

disadvantages

  • high price;

  • fragility of the material.

Tourmaline Rectifiers

Tourmaline Rectifiers

Curling plates with tourmaline plates are often found on the market. The surface is covered with a special powder that creates additional protection. This material is considered modern and safe for permanent use.

Tourmaline coating is considered progressive, so manufacturers wind up prices as a marketing move. It is safe for hair due to the lack of positive ions and a statistical charge. Hair stacked quickly, so this is the best option for those who often use straighteners.

Virtues

  • lack of statistical charge;

  • no burning effect;

  • uniform distribution of heat;

disadvantages

  • the difficulty of choosing a suitable model;

  • high price.

Titanium Rectifiers

Titanium Rectifiers

Titanium comes to replace the metal. It has improved performance, but not without some of the disadvantages of the metal. This material warms up quickly, but with it the hair burns to it. If you choose plates of titanium, it is desirable that they have an additional protective coating.

Titanium plates are the golden mean between metal and ceramic rectifiers. The cost of such a curling starts with a few tens of dollars. Remember that titanium is a metal and it burns hair. It is better to choose a model with a ceramic coating. Such plates keep their appearance for a long time and do a good job with tasks.

Many manufacturers are rectifiers, in which the plates have a coating with particles of silver. It improves the characteristics of the material mainly by reducing the ionization effect. However, be prepared for the fact that the cost increases, and significantly.

Virtues

  • strength and durability;

  • hair safety;

  • fast and uniform heating;

disadvantages

  • risk of hair damage;

  • high price.

Which rectifier to choose - determined by the size of the plate ironing?

Which rectifier to choose

In pursuit of high-quality material, do not forget that the final result is affected by the width and shape of the plate. First of all, the convenience of using this or that ironing depends on it. The standard parameters are as follows:

  1. plate width - 25 mm;

  2. plate length - 100 mm.

This is the best option for most girls, although if you select a straightener specifically for yourself, it is better to take into account the length and thickness of the hair. The basic parameters differ both to a greater and a lesser degree. In addition, working nozzles sometimes change. Usually the width varies from 15 to 30 mm.

The wider the plate, the more curls it captures at a time.. A few helpful tips to simplify your selection:

  1. for short hair, choose a narrow iron with plates no more than 15 mm, because it is much easier to handle with it;

  2. for hair below the shoulders, it is better to choose plates of at least 30 mm;

  3. for thick and long hair that is difficult to wrap in a bun, it is better to choose wide plates up to 40 mm.

If you have thick hair up to the shoulder blades, then with a small curling iron you will not be able to straighten them. The procedure will take a lot of time, and the result will still not meet expectations. For styling such hair will require a model with plates at least 4 cm wide and with a capacity of 50-60 watts.

There are also professional rectifiers on sale, in which the width of the plates reaches 8 cm. Such devices have a high power of 80 W and are intended for complex hair. But for domestic use they should not be chosen because of the high cost. However, if you seriously decide to engage in hair, then consider these options.

What is the heating temperature in the hair straighteners?

Temperature characteristics - another important parameter, if you plan to do hair styling. The high temperature helps to cope with thick and unruly hair, it reduces the time of the procedure, but at the same time there is a risk of damage to the structure.

Most household rectifiers heat up to 200aboutC, but there are models that have a higher temperature (about 230-250aboutWITH). Remember that irons that can heat up to high temperatures are often categorized as professional models and have additional features.

Temperature 200aboutC is the maximum for most devices, but it is still a lot. This mode can be used only for girls who have thick, dense or curly hair.All the rest is enough temperature in 2 times less to achieve the desired result.

Keep to the following temperature range:

  1. for thin and dry hair is not recommended temperature above 80-100aboutWITH;

  2. 80-150 mode recommended for normal and dyed hairaboutWITH;

  3. 150-200 recommended for coarse, curly and thick hairaboutWITH.

Above this limit, you should not warm up the curling, because it is dangerous even for thick hair. Such modes fall into the professional category, so choose them with caution.

What else should be considered when choosing a hair straightener?

Different hair straighteners from well-known manufacturers differ in many functions. They should pay attention when choosing a hair straightener:

  1. ionization - allowing to protect the hair from excessive drying and magnetization;

  2. steam treatment - straightening curly hair;

  3. function "2 in 1" - smoothing and curling;

  4. “Comb Effect” - smoothing and straightening.

Some models also have features for extra care of curls. The functions of ionization and steam treatment are popular, because in this case, you can safely raise the temperature to 200-230aboutC. In some rectifiers, the plates have small blotches, creating a “comb” effect.

Which manufacturers are most popular?

In the household appliances market, all segments are already divided between manufacturers. Consumers trust proven brands because they often offer a quality product. Among the irons and straighteners to these should include:

  1. BaByliss;

  2. Scarlett;

  3. Vitek;

  4. Polaris;

  5. GA.MA;

  6. Philips;

  7. Panasonic.

They offer quality products. In the lines of manufacturers there are budget irons, which are sold in the range of 500-1500 rubles. Such simple devices do not have thermostats and additional functions, but do a good job with their responsibilities.

For frequent and safe use, it is better to select advanced models in the price range from 2,000 to 3,000 rubles. They, as a rule, allow to choose a temperature mode, have ceramic plates and some additional functions.

Devices more expensive than 3,000 rubles have interesting features and impressive technical characteristics.

In the next article, our experts tell how to choose a hair comb.



Attention! This material is the subjective opinion of the authors of the project and is not a guide to purchase.
Comments
Loading comments ...

Product Ratings

Tips for choosing

Comparisons