6 best soldering irons for pipes

Plastic pipes are gradually squeezing out of metal highways from industrial buildings and houses. The high strength of polypropylene, polyethylene, PVC, HDPE makes it possible to compete on equal terms with steel and cast iron. In this case, polymeric materials are cheaper, easier to assemble, do not corrode. Many domestic masters learned to independently weld plastic pipes. To do this, purchase a special soldering iron (apparatus for socket welding). With its help, the ends of two pipes are heated, after connection and cooling a reliable and tight joint is obtained. With a little training, the welding process takes a few seconds, the master has to spend more time cutting and fitting the pipes. When the need arises to purchase the device, you should pay attention to several important characteristics of the soldering iron.

Criteria for choosing a soldering iron for pipes

1. One of the main parameters of an electrical device becomes heater power. If for household chores a 1000–2000 watt heater is sufficient, then professionals need more powerful devices with several heaters.

2. Choose a device for welding should taking into account the diameter used in the installation of pipes. Usually soldering irons are completed with an additional set of nozzles for different sizes.

3. From the type of plastic will depend on the maximum heating temperature (260-320 ° C). The best option would be to have temperature controllers, which can be manual or electronic. This option will help you choose the best welding mode.

4. As for additional functionality, it is very convenient to monitor the heating of the device by the light indication. A useful option will be a built-in thermostat that will maintain the temperature in the specified range.

5. It should also pay attention to the wealth of equipment. This applies primarily to beginners plumber. The presence of complete nozzles, level, pipe cutter, tape measure and keys will not be superfluous.

Our review includes the best soldering irons for pipes. When selecting applicants, the following criteria were taken into account:

1. power and performance;

2. universality;

3. price;

4. expert opinion;

5. consumer reviews.

Rating of the best soldering irons for pipes

Nomination	a place	Name of product	price
The best inexpensive soldering irons for beginners.	1	CANDAN CM-03	2 200 ₽
	2	Wester DWM 1500	3 599 ₽
	3	RESANTA ASPT-2000	2 470 ₽
Top Professional Soldering Irons	1	Candan CM05 2400W	6 090 ₽
	2	Dytron SP-4a 1200W TraceWeld Profi blue (63-125)	35 490 ₽
	3	WRM-160	121 000 ₽

The best inexpensive soldering irons for beginners.

When building a private house or repairing an apartment, many owners install water pipes themselves. For the successful implementation of this work it makes no sense to buy expensive professional devices. Experts picked up a few efficient budget soldering irons.

CANDAN CM-03

Rating: 4.8

Recognition from domestic masters of sanitary systems CANDAN CM-03 soldering iron won by the affordable price, ease of operation and simplicity. The device has enough power to ensure the heating temperature up to 320 ° C. Experts gave this model the first place in the rating for the xiphoid shape of the heater, on which two nozzles can be installed simultaneously.The device is able to work with a wide range of pipe sizes ranging from 16 to 75 mm. Included are 4 tips (20, 25, 32, and 40 mm), a tape measure, and a pipe cutter. For the convenience of working in different conditions, the manufacturer has equipped the soldering iron with a reliable clip and a convenient stand.

When you need to make repairs in the house or apartment, providing for the replacement of pipelines, you should look at the welding machine CANDAN CM-03.

Wester DWM 1500

Rating: 4.7

Soldering iron for Wester DWM 1500 pipes has decent functionality. Due to its high power (1500 W), the device connects plastic pipes for 4-6 seconds. The maximum heating temperature is limited to 300 ° C. The manufacturer is well equipped with the device, providing it with 6 nozzles with a diameter of 20 to 63 mm. Together with the soldering iron, the buyer will receive a screwdriver, tape measure, pipe cutter and gloves. The only disadvantage, according to experts, is the high price, so the model occupies the second line of the rating.

Users mark such a plus of the device as the presence of a thermostat. It allows you to set the optimum soldering temperature, which prevents plastic from overheating. But you need to adjust to the buttons of the device.

RESANTA ASPT-2000

Rating: 4.6

The RESANTA ASPT-2000 model has the highest power among budget welding machines. The two-kilowatt heater provides rapid heating of plastic pipes to a level of 300 ° C. Experts note a successful combination of the price of the device and its technical parameters. Saved the manufacturer to complete the soldering iron. Except 6 nozzles with a teflon coating in the set go only gloves. Roulette and pipe cutter will have to be bought separately. Therefore, the model deserves only third place in the ranking.

Users are satisfied with the presence of two modes of operation, which allows you to use the maximum power or limit it to 1 kW. The device is able to work for a long time, qualitatively connecting plastic pipes.

Top Professional Soldering Irons

When it is necessary to connect plastic pipes every day, only professional devices can withstand a serious load. They are characterized by high performance, temperature setting accuracy and durability. Experts compliment the following models.

Candan CM05 2400W

Rating: 4.9

The Candan CM05 Turkish Soldering Iron is popular with professional plumbing installers. The model has an optimal price-performance ratio. Experts appreciated the high power of the device (2.4 kW), fast heating to a temperature of 320 ° C, the ability to connect pipes with a diameter of from 50 to 160 mm. The device is equipped with two heating elements that can be switched on simultaneously or separately (1.2 kW each). About the achievement of the required temperature the master will be informed by 2 light indicators. To maintain the desired temperature (from 50 to 320 ° C) helps the thermostat.

Together with the device, the manufacturer attaches a key for attachments, a stand in the form of a tripod and a metal case.

Dytron SP-4a 1200W TraceWeld Profi blue (63-125)

Rating: 4.8

Excellent quality, durable and trouble-free operation is different Czech soldering iron Dytron SP-4a. In the device, the microprocessor is responsible for the optimum temperature mode, which makes it possible to achieve an accuracy of 1.5 ° C. A professional device is able to cope with a wide size of pipes, ranging from 16 mm to 125 mm. Welding time is determined automatically.Due to the set of these characteristics, the model falls into our rating. But the high price did not allow to become a winner.

Included with the device, the manufacturer attaches 5 nozzles, a key for attaching nozzles, a clamp, and a metal case. You can use a soldering iron not only indoors, but also in street conditions. In addition to polypropylene and polyethylene pipes, the device also welds materials such as PVC and HDPE.

WRM-160

Rating: 4.8

Soldering iron WRM-160 is a real welding machine that can solve the most complex tasks. Professionals appreciate the device for exceptional performance and ease of operation. The device is designed to connect pipes with a diameter of 50 to 160 mm. The welding machine does not have a record power (1.2 kW) and a high heating temperature (260 ° C). But experts note the outstanding accuracy of the temperature setting. This is achieved by an electronic thermostat. The machine is mounted on high legs, which makes the work more comfortable and less tedious. The model deserves the third line of our rating.

The unit is designed for large companies, hints about this and a very high price. Together with the machine, the consumer is offered a wooden box, interchangeable nozzles and bushings, 3 legs.

---

Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before buying, you should consult with a specialist.