5 best Makita drills
Makita is one of the largest manufacturers of building and professional tools. The technique developed by her is distinguished by high reliability, durability and functionality. And most importantly - it fully meets the requirements imposed on it.
However, the company's lineup includes many devices. Therefore, we have compiled a rating of the top 5 Makit drills, where you can find both professional solutions and suitable ones for infrequent “cosmetic” repairs.
Top Makita Drill Rankings
| Nomination | a place | Name of product | price |
| Top Makita Drill Rankings | 1 | Makita HP2071F | 9 606 ₽ |
| 2 | Makita DS4011 | 10 584 ₽ | |
| 3 | Makita HP2051F | 7 700 ₽ | |
| 4 | Makita HP1640 | 3 730 ₽ | |
| 5 | Makita 6413 | 2 762 ₽ |
Makita HP2071F
Rating: 4.9
Why she: High power hammer drill.
Universal drill, which is suitable for most repairs. The keyless chuck allows literally several movements, without tightening, to change the drill bit - and its diameter can be from 1.5 to 13 mm.
The built-in 1.01 kW motor provides maximum rotation speed of 2,900 rpm in idle mode and up to 58,000 beats per minute. The rotational speed is electronically controlled to achieve high accuracy. Supports two speeds and reverse mode.
Additionally, the tool is equipped with a second handle, which simplifies use, with a spotlight system and a drill depth limiter.
Virtues
- High power;
- Long cable;
- Quiet motor.
disadvantages
- Not.
Makita DS4011
Rating: 4.8
Why she: High-power hammerless drill that can be used as a mixer.
Almost universal device for home repair. The 750 W motor provides rotation at a speed of up to 600 revolutions per minute to idle, which is enough for fast processing of almost all materials. In addition, the drill can be used in the mixer mode, which is useful when carrying out repairs in the apartment.
The model is compatible with drills with a diameter of 2 to 13 millimeters. The cartridge is used key, with proprietary technology simplify tightening. The drive supports reverse function.
Also, the tool has a sophisticated design. So, it is equipped with three handles at once, due to which it is convenient for almost all jobs - from drilling any materials that are resistant to this type of processing to mixing building mixtures.
Virtues
- High reliability;
- Elaborate design;
- The rapid tightening of the cartridge.
disadvantages
- Low maintainability.
Makita HP2051F
Rating: 4.7
Why she: Many systems of protection of the "entrails" of the device.
This impact drill differs from the leader of a rating only in power. But in general, it retains the "flagship" functionality and is durable. To increase the service life, it is equipped with double protective insulation and anti-vibration system.
The drive of the drill has a power of 720 W and provides a rotation speed of up to 2900 revolutions per minute in idle mode. The frequency of attacks - up to 58 thousand per minute. The drill chuck is equipped with a proprietary fast-clamping system and is compatible with drill bits from 1.5 to 13 mm thick.In addition, the motor supports two speeds of operation, controlled by an electronic control system, and reverse rotation.
Also, the design of the drill includes an additional handle, which simplifies use; backlight lamp and penetration depth limiter drill.
Virtues
- Silent;
- Powerful cartridge;
- Lightweight
disadvantages
- Inconvenient adjustment system, too sensitive and with an unsuccessful switch arrangement;
- Cold cable;
- Very deep cartridge, captures the screws of some drills.
Makita HP1640
Rating: 4.6
Why she: One of the best drills for non-professional home use.
This model is focused on home use. And from this point of view, the device offers an excellent combination of price and technical characteristics. In particular, this drill belongs to the class of drums, and a drive with a power of 680 W provides a rotational speed of up to 2800 revolutions per minute when idling. The frequency of strokes is up to 45 thousand per minute.
The tool is equipped with a key chuck with which drill bits with a diameter of 1.5 to 13 millimeters can be used. The drive supports reversing, but the speed of the drill is only one.
The design of the drill includes an additional handle to simplify use and limit the depth of penetration of the drill. There is also a security key that blocks the power button.
Virtues
- Convenient, sophisticated design;
- Reliable drive, withstands high loads;
- Low weight - only 1.8 kg.
disadvantages
- Relatively low power;
- Not very comfortable cartridge;
- Poor quality of materials.
Makita 6413
Rating: 4.5
Why she: One of the best low-cost drills on the market.
The main advantage of this hammerless drill is not at all its low price (although this is the cheapest device in the rating). This model is great for occasional and non-professional use. The design of the tool includes a special keyless chuck, compatible with drills with a diameter of 1-10 millimeters and a 450-watt drive, providing a rotational speed of up to 3000 revolutions per minute.
For the control of the speed of the electronic control system is responsible. The speed of the drill is only one, but there is a reverse rotation mode for quickly removing the drill from the material being processed. To protect against inadvertent activation, the device is equipped with a start-up key lock.
Virtues
- Durable drive and bearings;
- Electronic speed control system;
- High-quality assembly, low weight.
disadvantages
- Relatively short (2 m) cable;
- Unpleasant "squeak" at high speeds;
- No case included.
Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before buying, you should consult with a specialist.
