16 best self-leveling floors

To get a perfectly flat surface in a short time allows self-leveling floors. With the help of this material it is possible to eliminate small defects, after drying of the coating there is no shrinkage, and the surface is durable and wear-resistant. In the building stores of Russia a wide range of leveling compounds is offered. Make the right choice will help the recommendations of experts.

How to choose a self-leveling floor

1. The foundation. All self-leveling floors can be grouped by the material of the binder. Cement compositions possess high hardness, but they dry for a long time. The gypsum-based mixtures harden quickly, the surface is wear-resistant, but it is afraid of moisture. Smooth glossy coating can be obtained with the help of epoxy compounds. It is used for the device of 3D floors, the surface is resistant to abrasion and moisture, but the shock load should not be high. Polyurethane floors can boast elasticity, some compositions are allowed to be used on wooden bases. Due to their beautiful appearance, they are used as a finishing coating, but the base should not have serious defects.
2. Scope of application. When choosing the most suitable self-leveling floor, experts advise to consider the location of the work plane. The apartments look great epoxy compositions with acrylic dyes or transparent coatings with the image on the substrate. For simple leveling, users most often choose cement or gypsum compounds. In baths, saunas, bathrooms, bathrooms and kitchens it is optimal to use polyurethane mixtures. On the street, the easiest way to level the base with cement formulations.
3. Coating thickness. When choosing a self-leveling floor, one should pay attention to such a parameter as the recommended thickness of the leveling layer. If the base has large elevation differences, then a highly filled material with a layer thickness of more than 5 mm is better. Self-leveling compounds are considered to be products that form a coating 4-5 mm thick. Thin-layer compositions (up to 1 mm) are optimal for finishing.
4. Drying speed. Many consumers do not carefully study the recommendations of manufacturers regarding the drying time. The specified interval indicates how many hours or days the coating can be walked on. This does not mean the possibility of further finishing work. The gypsum-containing self-leveling floor hardens very quickly (2-4 hours). Polyurethane compounds withstand up to 20 hours, and epoxy and cement mixtures are recommended to leave for 1-2 days. Lay tile, laminate or linoleum is allowed in 7-28 days.
5. Mixture consumption. Many buyers prefer inexpensive self-leveling floors, not taking into account the consumption of the composition. Manufacturers indicate it in kilograms per 1 square meter of surface with a layer thickness of 1 mm. Cement mixtures have the highest consumption.

We selected the 16 best self-leveling floors. All of them are present in the trading network of our country, their use has been approved by experts and consumers.

What is better screed or self-leveling floor

Type of leveling coating	Virtues	disadvantages
Screed	+ affordable price + aligns large drops (from 2 cm) + wide range of finishing	- requires the installation of beacons and the presence of a special tool - low surface quality - large layer thickness (at least 2 cm)
Self-leveling floor	+ easy base alignment + possibility of self-use + high surface quality	- high price - the coating is not subject to restoration - you can align small drops

Rating of the best self-leveling floors

Nomination	a place	Name of product	price per kg
The best decorative self-leveling floors	1	Teping Floor 205 PU	387 ₽
	2	GLIMS HEAVY DUTY HD drymix	57 ₽
	3	Arturo EP2500	1 100 ₽
	4	Polymerstone 2	425 ₽
	5	Elakor-ED	315 ₽
	6	Monopol 5	500 ₽
The best self-leveling floors for leveling surfaces	1	Miners Quick Harden	12 ₽
	2	Bergauf easy boden	17 ₽
	3	VOLMA – Nivelir Express	19 ₽
	4	Knauf-Tribon	14 ₽
	5	Eunice Horizon	17 ₽
	6	Scorline FK45R	20 ₽
	7	Vetonit-5000	25 ₽
	8	Ceresit CN-175	23 ₽
	9	BOLARS Finishing SV-1010	18 ₽
	10	Litopol De Luxe	12 ₽

The best decorative self-leveling floors

Some types of self-leveling floors allow you to get a beautiful finish. Some of them are used to create 3D finishes, others become elegant after the introduction of dyes. Experts drew attention to several compositions.

Teping 205 PU

Rating: 4.9

Since 2007, self-leveling floors under the Teping brand have been produced in St. Petersburg. Particularly popular with domestic builders is the Tapping Floor composition 205 PU. This versatile product is a two-component mixture consisting of a polyurethane base and a hardener. After polymerization, a plastic and durable coating is formed, which is not afraid of vibration, temperature drops and shock load. The manufacturer recommends a self-leveling floor, both for finishing living spaces, and for arranging unheated warehouses and garages.

For the excellent price-quality ratio, as well as high decorative qualities, the experts gave the laurels of the rating winner to the product. Users are satisfied with the strength and durability of the flooring.

GLIMS HEAVY DUTY HD drymix

Rating: 4.8

Very reliable flooring can be obtained using a two-component mixture of GLIMS HEAVY DUTY HD drymix. The strengths of the self-leveling floor experts include high compressive and flexural strength. Experts recommend the composition for finishing production workshops, garages, car depots, car parks, warehouses, etc. The manufacturer allows for tinting of the finished solution, which increases the decorativeness of the floor covering. The floor surface becomes waterproof, resistant to chemicals and petroleum products. Domestic composition takes the second place in our rating, yielding to the winner in price.

The builders have no special claims to the quality of the self-leveling floor. The solution mixes quickly, after 24 hours it hardens completely.

Arturo EP2500

Rating: 4.7

It is possible to get a seamless glossy floor with the help of Arturo EP2500 composition from the Netherlands. The manufacturer does not use harmful solvents, so the prepared solution does not have an irritating smell. Due to its ecological compatibility, the self-leveling floor can be used for finishing kitchens and bathrooms, premises in schools, gardens, factory workshops. Epoxy material can be used undiluted, to increase the thickness of the layer is allowed to add quartz sand. In order to increase the decorative properties, it is allowed to introduce a color in the finished solution.

The experts gave the material the third line of the rating. It was not possible to bypass the leaders because of the long drying time (7 days) and the high price. And users are satisfied with high decorative qualities, noting only a small thickness of the coating (1-5 mm).

Polymerstone 2

Rating: 4.6

Thin, but very durable flooring is formed when using the composition Polymerstone-2. Builders often call this material liquid linoleum. A two-component polyurethane product has a gray color, the manufacturer allows the introduction of colors. The prepared working solution has a good viability (up to 40 minutes), which allows finishers to make amendments. You can create a topcoat with the help of Polymerstone-2 in any enclosed spaces, starting with apartments and ending with public institutions. The experts gave the self-leveling floor the fourth line of the rating, since the thickness range is limited to 2-3 mm.

Users like the affordable price of the material, fast curing time (24 hours), high strength. The surface is perfectly smooth and even.

Elakor-ED

Rating: 4.5

Elakor-ED self-leveling floor has high wear resistance. It is prepared on the basis of epoxy resin, so that after hardening a transparent layer is formed. This feature is appreciated by lovers of the original decor, sealing glitter or inlays under the cover. The manufacturer recommends sticking to a thickness of 1.5 to 5 mm, but it is better to create a 3D effect in a layer up to 2 mm. The composition is intended for use in indoor areas, to finish the floor should be in the temperature range of 5-25 ° C. The material is highly resistant to UV rays, it does not fade with time.

Bulk floor Elakor-ED falls into our rating at an affordable price, transparency and durability. The disadvantages include a long time of hardening (72 hours).

Monopol 5

Rating: 4.5

The Russian structure of Monopol 5 closes the six of the best decorative self-leveling floors. A distinctive feature of the material is a three-component structure. Along with the epoxy base and hardener, a dye is included. It is mixed first with epoxy, and then a hardener is added. The product is intended for topcoat, the layer formed quickly gains strength. The advantages of the self-leveling floor experts include resistance to shock loads, abrasive and chemical effects. The semi-matte surface looks aesthetically pleasing.

Builders are somewhat unhappy with the difficult preparation of the working mixture. In addition, it is often necessary to additionally use the soil Monopol. Bulk floor is afraid of vibration, which limits the scope of application.

The best self-leveling floors for leveling surfaces

To eliminate defects on the bases allow leveling self-leveling floors. Most often after drying tile, parquet, laminate or linoleum is laid on the formed surface. Experts liked the following building mixtures.

Miners Quick Harden

Rating: 4.9

The easiest way to level the floor with the help of a self-leveling floor. This gypsum-based compound is optimally suited for living rooms, hallways and kitchens. The prepared solution has a high mobility, which allows leveling the surface within 40 minutes. But the solidification time is quite short (4 hours). The manufacturer allows a mechanized casting method, the leveling layer is from 5 to 80 mm. Given the democratic price, experts gave the product first place in our rating.

Users are satisfied with the affordability, fast curing time, a flat surface.But when self-leveling there are difficulties, so it is better to entrust this work to professionals.

Bergauf easy boden

Rating: 4.8

Those users who prefer to do their own repairs in their house or apartment should take a closer look at the composition of Bergauf Easy Boden. Despite the German name, a product is made in our country. However, in terms of cost, it is inferior to the leader of the rating. Thanks to cement-based self-leveling floor is easy to use. In addition, it can be used in wet areas (bathrooms, showers, bathrooms). It is possible to apply the prepared solution without problems on its own, the manufacturer admits the possibility of mechanized casting. The base may be a concrete slab or "warm floor".

Builders are pleased with the simplicity of laying and leveling, but the coating hardens longer than gypsum-containing analogues. The disadvantages include the high price.

VOLMA – Nivelir Express

Rating: 4.7

A lot of good reviews from professional builders come to the address of the self-leveling floor VOLMA – Nivelir Express. Masters note the durability of the prepared solution (up to 60 minutes) and high mobility. At the same time, the curing time is only 4-6 hours. Therefore, experts recommend using it in those premises where accelerated repairs are required. The most difficult bases with a height difference from 5 to 100 mm are subject to leveling. The product is worthy of the third position of our rating.

Most of the feedback from users is positive. But there is also negative experience due to poor quality. The reason may be counterfeit products, but consumers do not like the feedback from the manufacturer.

Knauf-Tribon

Rating: 4.7

The perfect combination of cement, gypsum and mineral fillers make the Knauf-Tribon self-leveling floor one of the most bending-resistant. Therefore, the composition can be used not only on the screed and concrete, but also on wooden flooring. Experts attribute the advantages of the mixture to high viability (60 minutes) and moisture resistance. The manufacturer allows the use of the product in any premises. The thickness of the layer is from 10 to 60 mm, the range is somewhat narrower than that of the leaders of the rating. A prerequisite is the device and additional finishing coating.

Users have identified several shortcomings, the main of which they consider low resistance to UV radiation. But good sound insulation should be attributed to the asset of the product.

Eunice Horizon

Rating: 4.7

The Eunis-Horizon composition proved to be excellent in wet conditions. To create it, a cement base was used, which is perfectly complemented by other components. As a result, the manufacturer managed to achieve a high curing rate (3 hours). Experts consider it the best material when you want to level a solid base (concrete floors, screed). The composition is not afraid of temperature changes, it is suitable for the device "warm floor". Another factor for getting into our rating has become an affordable price.

As for the drawbacks, users note a high consumption of the product and a small viability (30 minutes). But in bathrooms, baths and saunas the self-leveling floor often becomes a magic wand.

Scorline FK45R

Rating: 4.6

The combination of mineral base and polymer fillers makes the Scorline FK45R self-leveling floor one of the fastest setting. Already after 2 hours after leveling it is allowed to walk on the surface. Laying ceramic tiles or expanded clay is recommended after 3 hours. And the other types of finishing work is best done after a week exposure. In the case of a "warm floor" device, it is advisable to allow the coating to last for 28 days. Layer thickness can vary between 2-100 mm.

Builders are satisfied with the viability of the prepared solution (40 minutes), the ability to eliminate serious uneven grounds. The product closes the rating of the six best leveling compounds, because users complain of the appearance of cracks after drying.

Vetonit-5000

Rating: 4.5

Increased interest among domestic homeowners has caused a new company Weber-Vetonit. This is the leveling compound of Vetonit-5000. It attracts an affordable price. Specialists who have managed to work with the product, allocate a few points. First, the ready-made solution is thick enough, so you will have to use beacons and the rule for leveling. The mixture dries quickly, after 2 hours it is difficult to remove the beacons from the floor. After hardening, the surface is roughened due to the coarse filler fraction. Therefore, after leveling the finishing of the floor is required.

Having studied all the advice of professionals, the experts gave the composition of the 7th place in the ranking. On the one hand, it mixes easily with a mixer or a drill, but the alignment is best left to experienced finishers.

Ceresit CN-175

Rating: 4.5

The universal leveling mix Ceresit CN-175 has a whole set of useful qualities. With its help it is possible to smooth the unevenness of the base in the range of 3-60 mm. The experts point out the strengths of the product: no shrinkage after drying, resistance to cracking. The composition gets in our rating also for environmental friendliness. The manufacturer recommends using it in residential and bathrooms. The covering is gained the necessary hardness for walking within 4 hours. The prepared solution can be applied manually or mechanized.

The self-leveling mixture could not rise above due to the difficulty of preparation, and the surface quality after drying also leaves much to be desired.

BOLARS Finishing SV-1010

Rating: 4.4

The composition BOLARS Finishing SV-1010 can be used as a finishing floor. The product combines qualities such as thin layer and compressive strength. Experts highlight a wide range of applications. It is possible to level the floors not only in the interior, but also outside the buildings. Binding component of the mixture is cement, so the curing time can exceed 6 hours. The viability (30 minutes) is considered not very high, which requires the employee to be quick in leveling. But the consistency of the prepared solution is optimal for uniform spreading.

The composition could not take a higher place in our rating due to consumer feedback. They are unhappy with the quality of the material.

Litopol De Luxe

Rating: 4.3

One more finishing bulk floor gets to our rating. This composition Litopol De Luxe.It is very easy to use, which pleases beginner finishers. To obtain the finished solution, it is sufficient to mix the dry powder with water (2-3 minutes) with a mixer. 2-3 minutes, the resulting mass is allowed to brew, after which it is again mixed. It remains to evenly and quickly (up to 30 minutes) to distribute the solution on the base. Drying time for walking is 6 hours, but linoleum, laminate, parquet or tile should be laid after 7 days. With the help of the composition, it is possible to level serious drops (5-100 mm).

Among the shortcomings, consumers note the high consumption of the product, the need for prompt leveling, the fear of solution drafts and sunlight.

B

---

Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before buying, you should consult with a specialist.