15 best jacks

How to choose a good jack

Very often, users choose a car jack by type preference, bypassing the design nuances, as well as, in a series of cases, even load capacity parameters. It is worth noting that this approach does not guarantee at all that the model chosen by you will be able to serve for a long time and become a reliable element in your personal toolkit. In this regard, the magazine "expert.bigbadmole.com/en/en/" recommends that you pay attention to the following criteria:

1. Load capacity. The first and main aspect of the choice, which should be treated with great care. When choosing a jack, be sure to estimate the actual weight of your vehicle (taking into account additional things in the trunk, passenger compartment, etc.) and further build on the resulting figure. In the general case, screw jacks are suitable for passenger cars, designed for a weight of from 1.5 to 3 tons. For SUVs are ideally suitable podkatnye (at service stations) or bottle jacks with a lifting capacity of 3-8 tons. All that has indicators above these numbers - options for trucks.
2. Pickup height. This parameter is one of the most undervalued, and, in fact, the most important after the actually raised weight. It is determined by the ground clearance of the car, which must be taken as the standard. In this respect, the least problem will be experienced by the owners of off-road vehicles and lorries, whose car clearance will allow to easily place under the bottom (on the Langeron) ratchet, bottle, rack and other types of jacks (with a pickup height of more than 150 millimeters). However, if the car is passenger and the ground clearance does not exceed 150 millimeters, then only screw and sliding models will be the most likely options.
3. Lift height. Characteristic showing to what height from the fulcrum the jack is able to lift the planned load. The range of variation here is from 300 to 500 millimeters, and this height is often enough to replace the wheel or other repairs. If it is necessary to obtain more significant lifting heights, the acquisition of rack jacks should be considered. These models are able to lift cars up to 1000 millimeters above the ground and are used mainly when driving off-road.

Which jack is better screw, bottle or rolling

Type of jack	Benefits	disadvantages
Screw	+ Lightweight design + Lowest price in the segment + The possibility of picking up cars with low ground clearance (from 95-100 mm) + High stiffness rhombic frame	- Low stability due to narrow support heel - Ability to break the screw at the top of the lift - Low payload - Uneven distribution of effort on the handle
Bottle	+ Good load capacity + Ease of manipulation (force is transmitted through the pump lever) + High degree of stability due to wide support heel + Average cost	- The need for periodic maintenance (decontamination, seal checks and valve opening) - Inability to pick up cars with low ground clearance - The destruction of seals over time and, as a consequence, oil leakage with the need for its periodic refilling
Rolling	+ A huge variety of drive mechanisms (pneumatic, hydraulic, mechanical, etc.) + High degree of stability + Low profile and low initial pickup level + High rigidity + Uniform power transmission	- The highest cost in the segment - Large mass and dimensions of the structure - The need to place only on flat surfaces (due to the possibility of skewing)

Ranking of the best car jacks

Nomination	a place	Name of product	price
Top jacks	1	WIEDERKRAFT WDK-81885	12 052 ₽
	2	Matrix 51040	5 024 ₽
	3	KRAFT CT 820003	3 230 ₽
	4	SKYWAY S01802005	2 519 ₽
Top bottle jacks	1	Kraftool 43463-6	2 713 ₽
	2	AIRLINE AJ-TB-12	3 899 ₽
	3	AUTOPROFI DG-08	1 476 ₽
	4	Bison 43060-12	1 649 ₽
Top rack jacks	1	SKYWAY S01803005	5 409 ₽
	2	MATRIX 505155	3 549 ₽
Top screw jacks	1	AUTOPROFI DV-15R	960 ₽
	2	KRAFT CT 800025	830 ₽
	3	Airline AJ-R-02	969 ₽
	4	BELAVTOKOMPLEKT BAK.00058	749 ₽
Best Inflatable Jack	1	AIR JACK 3 tons	6 310 ₽

Top jacks

WIEDERKRAFT WDK-81885

Rating: 4.9

Low-profile German-made jack designed for use at service stations and vehicle inspection points. It has two working cylinders, which increases the reliability of the moving part and allows you not to fear for a possible failure. It has a lifting capacity of 3 tons, slightly increasing the variety of serviced vehicles.

With dimensions of 640 × 342 × 174 millimeters, WIEDERKRAFT WDK-81885 provides a lift of the serviced car (or other large cargo) to a height of 455 millimeters, which is a good result, especially for low profile jacks. The only weak point identified by consumers was the mass parameter: moving 34 kilograms of metal in space is a rather complicated task. In other aspects, this model is above all praise, justifying the price tag with excellent performance.

    

Matrix 51040

Rating: 4.8

The standard profile rolling jack (with a pickup height of 150 millimeters) got into the rating due to its high popularity at the maintenance points. Having one working hydraulic cylinder, this model is in no way inferior in quality to more powerful two-cylinder competitors, ensuring reliable pickup of a vehicle weighing up to 3 tons. The height of its rise reaches 530 millimeters, which allows you to easily climb into the area of ​​repair work.

Another important advantage of the Matrix 51040 is its own weight, equal to 21 kilograms. It is convenient to move it in space and quickly install on the rise, which is very important for work in the maintenance points. Due to its low cost, this unit is a priority choice in the modern conditions of the market segment.

KRAFT CT 820003

Rating: 4.7

In spite of the outward-looking fragility and compactness, the KRAFT KT 820003 is a very durable jack designed for lifting loads weighing up to 2.5 tons. Its main feature is a good balance between cost and performance. Largely due to this, he managed to secure popularity in the realities of garage repair and small service stations focused on situational car maintenance.

Being a representative of models with an average construction profile, it provides pickup at the level of 135 millimeters and is able to lift cars with low ground clearance. True, this plus is compensated by one very annoying nuance: the maximum lift height hardly reaches the level of 385 millimeters. The final advantage of the KRAFT KT 820003 is its low own weight: just 12 kilograms, which direct competitors cannot boast of. Under the condition of the ratio of carrying capacity to its own weight, this jack is the best of its kind.

SKYWAY S01802005

Rating: 4.6

He ensured that SKYWAY S01802005 was included in the list of the best and compact jack, which was used by consumers engaged in frequent repairs of passenger cars in a garage. Its carrying capacity is limited to 2.3 tons, which, in terms of its own weight (8.7 kilograms), is an excellent result. The height of the pickup here is similar to the competitor in the face of the KRAFT KT 820003, and is 135 millimeters, which indicates that the jack belongs to the models of the standard profile.

As for the maximum lifting height, here it is equal to 340 millimeters, being the smallest indicator among the options given in the rating. This nuance somewhat constrains the actions of the master in repair and maintenance of the bottom part of cars, but in general does not represent an unsolvable problem. As a result, we have a decent representative of the category of jacks with the lowest price and acceptable performance indicators.

Top bottle jacks

Kraftool 43463-6

Rating: 4.9

A six-bottle bottle-up jack, which is a bestseller among SUV and small truck owners. It is a very durable tool made from a high-quality selection of materials - from the body to the hydraulic cylinder and the piston part. Provides pickup of vehicles at 170 millimeters, which is acceptable even for a number of passenger cars. Peak lift height is limited to 420 millimeters, enough to hang the wheel and work under the bottom of the body.

Despite such impressive performance parameters, the constructive weight of Kraftool 43463-6 does not differ in transcendental values ​​- the device in working condition weighs no more than 5 kilograms. And in terms of price, let's be honest, this model seems to be the most affordable on the market, leaving the closest analogues out of business.

AIRLINE AJ-TB-12

Rating: 4.8

More robust analogue of the jack AUTOPROFI DG-08 surpasses it in almost all relevant parameters of the comparison, for which he achieves the coveted second line in the ranking of the best. Its carrying capacity is nearly 12 tons, which makes it possible not only for small trucks and SUVs, but also to hang loaded bodies. The lifting height at peak is 500 millimeters, but the entire cylinder stroke is limited to 270 millimeters. In other words, the pickup point AIRLINE AJ-TB-12 is located at 230 millimeters, which automatically cuts the trouble-free use of a jack with some cars.

Another important feature of the model is that with such high load capacity, its own weight is only 9.5 kilograms.On the one hand, it is very good, since this jack is more adapted for comfortable use and transportation. But on the other hand, the same nuance can be critical in the case of lifting the maximum calculated load - small mechanical damage can lead to inevitable breakage of the piston and collapse of the AIRLINE AJ-TB-12 profile.

AUTOPROFI DG-08

Rating: 4.7

The bottle jack is made in China, providing the possibility of lifting loads up to 8 tons. Due to this working characteristic, it is most often used as a complete repair element for trucks, but because of its low cost it is often purchased for use on passenger cars. At the heart of its feature is the presence of a bypass valve, which allows the piston to perceive short-term loads exceeding nominal values ​​up to 25 percent. In other words, the AUTOPROFI DG-08 mechanism is capable of withstanding up to 10 tons of load, but it is still not recommended to abuse this feature too often.

Height of raising of this jack is limited to 405 millimeters, and pickup is carried out on 200 millimeters. With such impressive performance characteristics, the model's own weight is only 13 kilograms, which, in fact, not so much.

Bison 43060-12

Rating: 4.6

Hardy jack of domestic production, the main advantage of which is expressed in the maximum capacity and non-trivial approach to use. The ability to lift up to 12 tons on the piston is not given to every model; however, to bring the load to the peak lifting point (465 millimeters) here it is necessary to apply truly titanic efforts. Pumping fluid at such a load is extremely slow, which requires a large number of movements of the lever. He unequivocally hints at the limits of applicability and the pickup height of 230 millimeters - cars with low ground clearance are automatically dismissed from the list of serviced ones.

"Bison" 43060-12 has a special extension arm, which also complains about the use of a jack exclusively for hard work. In this case, the reverse side of the lever, made flattened, is used to relieve fluid pressure by loosening the bypass valve. This and many other model solutions - no more than an attempt to fit into the budget segment, where, it is worth paying tribute, the jack looks very preferable.

Top rack jacks

SKYWAY S01803005

Rating: 4.9

Rack jack of mechanical type is a frequent element of technical equipment for the repair of passenger cars. And in the case of the model SKYWAY S01803005 - and highly recommended by experts. This unit is good because at peak peak lift can be up to 1350 millimeters, and pickup is carried out already at 130 millimeters. In this way, you can absolutely everything that weighs up to 3.5 tons - cars with this jack are serviced without any problems.

According to users, the SKYWAY S01803005 rail is made of high-quality instrumental lining, and can withstand short-term overloads without severe structural damage. About the coolness of this jack indirectly says the weight parameter, equal to almost 14 kilograms.It will be very expensive to carry such a “baby” on a daily basis, but when driving off-road it will be indispensable. At the end of the brief review, let me reiterate the key idea: to find something similar for the same amount is simply impossible.

MATRIX 505155

Rating: 4.8

In terms of the functionality parameter, the MATRIX 505155 does not, of course, compare with the category leader (SKYWAY S01803005), but in terms of reliability, it is beyond praise. This parameter is the only good reason to buy this model, and not only for a possible "garage" maintenance, but also for everyday needs. The quality and reliability of this model is expressed, first of all, in the massiveness of the main working parts: the weight of the jack assembly is 11.65 kilograms. In a detailed comparison of analogues on the subject of constructive endurance, experts prefer this jack, noting a greater tendency to the correct distribution of loads over the entire surface.

The load capacity of the MATRIX 505155 is 3 tons, revealing a fairly wide range of applicability to the model. But with the height of the pickup, not everything is so great: 153 millimeters in the minimum sharply cuts off a decent part of passenger cars from the total number of cars served. The maximum lift height is also small (only 700 millimeters), but sufficient for off-road raids. In addition, you should not forget about the possibility of using this jack as a manual winch - with this functionality (and reliability), its value increases many times.

Top screw jacks

AUTOPROFI DV-15R

Rating: 4.9

"Breed" jack of Chinese origin, who managed to stand out against the background of other models of his series. Reasoning more globally, he also turned out to be not without flaws, but those concern only the parameters of ergonomics. Namely: AUTOPROFI DV-15R requires a much more prudent and careful installation, because with the slightest bias it leads to the side.

According to users, all the charm of this model lies in a good balance of price and quality, to which experts respond with unequivocal approval. The height of the ascent here is 390 millimeters, however this “diamond” should not be brought to the peak - in the reviews there are enough cases with its “folding” from the top point. Grabbing is carried out on the horizon of 100 millimeters, which, together with a lifting capacity of 1.5 tons, provides a fairly wide applicability. From the point of view of cost, this option is the most preferable, especially in view of quite good (really good) operational conditions.

KRAFT CT 800025

Rating: 4.8

The inexpensive rhombic jack of the initial level, which heroically maintains the declared characteristics practically at the maximum possible height of rise. Despite the nominally German origin, KRAFT KT 800025 is made in China, however, a certain degree of continuity is still present here. It is expressed mainly in the endurance of the screw mechanism, which allows to lift 2 tons of cargo up to 350-370 millimeters (with a maximum lifting height of 395 millimeters). As for the pickup, it is carried out at a height of 110 millimeters, providing the possibility of servicing passenger cars with low ground clearance.

Not in KRAFT KT 800025 and without factory flaws.The first and most scrupulous of them is the low stability of the jack when a load is applied: it is necessary to look for a clear vertical line, otherwise a barely noticeable bias will first go to take the model aside as the force is applied. The second (and last) nuance concerns the fragility of the rubber lining on the supporting platform: the benefit is that this element can be easily replaced at home.

Airline AJ-R-02

Rating: 4.7

Perhaps the most affordable jack from the entire range of screw, presented in all auto shops in our country. However, it is popular not only for this: the main reason is the high degree of universality. Think for yourself: Airline AJ-R-02 provides a unique opportunity to lift vehicles with ground clearance from 95 millimeters to a height of 400 millimeters. This run-up is enough not only to replace the wheels on passenger cars, but also for a full-fledged "field" service of the crossover category.

The actual load capacity of the Airline AJ-R-02 is 1.8 tons (opposite to 2 tons, declared by the manufacturer), which, nevertheless, is a good margin of safety for working with the vast majority of urban cars. As a nice bonus of a complete set, a rubber lining was installed on the jack support foot, protecting the body paintwork from chipping and scratching. However, as in most cases, the quality of the material leaves much to be desired, in connection with which it is pressed or even begins to move away from the site. However, this nuance does not harm the overall impression of the model, the main advantage of which is the low price.

BELAVTOKOMPLEKT BAK.00058

Rating: 4.6

It is known for certain that the screw jack of domestic production is almost the most purchased one in its price segment, and the feedback on its use is very positive. True, with a small reservation regarding the characteristics of endurance: both users and experts agree that they are not sufficiently expressed. In terms of technical parameters, the BELAVTOKOMPLEKT BAK.00058 looks very standard: a weight of up to 1.5 tons can be raised to a height of up to 350 millimeters. The height of the profile of the jack at the time of implementation of the pickup is 100 millimeters.

With seemingly good technical conditions, the weight of the model does not exceed 2 kilograms, and therefore knowledgeable people strictly limit the maximum possible lifting height by about 50 millimeters. However, for the maintenance of a passenger car in the field it will be quite enough: it provides a small overhang of the wheel for replacement, it provides, and, therefore, copes with its preventive task.

Best Inflatable Jack

AIR JACK 3 tons

Rating: 4.7

In the recent past, the Air Jack was just a prototype of a new type of jack, tested for effectiveness in various operating conditions. However, today this pneumatic model is the most rational tool for off-road adventures, which is not afraid of sand, snow, clay and mud.Thanks to the ability to adapt to the terrain of the ground, the Air Jack does not have the drawbacks that are characteristic of jacks with a small supporting heel: they do not subside, being stuck in the ground in parallel, and also not subject to misalignment, which can cause a car to stall.

An important advantage of this model is the possibility of lifting the car, even with a 20-mm clearance without the need for digging and deepening the installation site. At the same time, it is possible to “lift up” a car up to a height of 700 millimeters, which is why there is no need to use heavy rack jacks. As a result, a huge number of advantages are in the asset of the model, but in fairness it should be noted that the Air Jack's manufacturing technology is still not stable enough.

---

Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before buying, you should consult with a specialist.