14 best manufacturers of plastic windows

Plastic windows are confidently squeezing wood constructions from the domestic market. And even though in Europe the number of connoisseurs of natural material is gradually increasing, in Russia this fashion trend has not yet been traced to sales volumes. Only rich people can afford window systems with a traditional carved trim. The popularity of PVC products due to durability, availability, good heat - and noise insulation properties. In addition, the plastic does not require special care. Today on the Russian market there is an abundance of PVC window systems. But if earlier it was mainly products of foreign brands, today the share of domestic manufacturers has increased significantly. At the same time, the choice of windows for consumers was also difficult. In this issue without the recommendations of experts can not do.

How to choose plastic windows

1. One of the key points in the selection of plastic windows is profile type. There are deaf systems, swivel structures and tilt-and-turn options. The windows with tilt-and-turn mechanism look more profitable, but they are more expensive. Often consumers order the combined window blocks where one leaf opens, and the second has a deaf design. This is explained by a reasonable desire to save. In addition, fixed sashes have the best thermal and sound insulation qualities.
2. Heat and noise insulation properties of PVC windows depend on number of cameras. The more they are built into the profile, the better the insulating qualities. But the price is getting higher. For the middle band, 2-3 chamber designs are sufficient. On the unheated loggia can be limited to one camera. But residents of the northern regions have to order window units with 4-6 cameras.
3. Glass has undergone a major modernization. Popularity is gaining low emission productswhich are saturated with silver atoms. They have a high light transmission ability and excellent thermal insulation properties. The flame of a match in such a glass has a purple hue.
4. You should not save on such an element of a plastic window as fittings. It is, in fact, a consumable item. First of all it concerns tilt-and-turn constructions. High-quality handles, curtains and locks will serve more than 10 years.
5. Today, white window units no longer attract glamorous society. Some manufacturers, going to meet them, produce painted profiles. In the rich color assortment, you can find even models under the tree. In this sense, the buyer will have to independently select a window for the external or internal design of the house.
6. Simultaneously with the choice of window blocks for the apartment and the house, care should be taken to install them. Often, manufacturers provide a guarantee on their windows only if the installation is carried out by official representatives. It is also important to read the warranty conditions where the pitfalls can be hidden. At the same time, it is worth asking about the finishing of slopes, perhaps the company will make a pleasant discount when buying and installing several windows.

Our review includes the best manufacturers of plastic windows. The following criteria were taken into account when compiling the rating:

1. product innovation;
2. technical specifications;
3. price policy;
4. the development of the trading network;
5. expert opinion;
6. consumer reviews.

Table of advantages and disadvantages of plastic and wooden windows

Window type	Benefits	disadvantages
Plastic	+ excellent noise and heat insulation + attractive appearance + easy care and operation + no protective coating required + maintainability + durability	- high dependence on installation quality - the difficulty of repairing defects with your own hands - used unique hardware - in a cold time additional warming is required
Wooden	+ environmental friendliness + high decorative properties + possibility of self-repair + any accessories can be used + good heat and noise insulation	- the need to apply and update impregnations and varnishes to protect against the influence of the atmosphere - requires periodic care

Rating of the best manufacturers of plastic windows

Nomination	a place	Name of product	price
The best manufacturers of plastic windows in terms of price-quality ratio	1	Veka	4.9
	2	Rehau	4.8
	3	KBE	4.7
	4	Proplex	4.7
	5	Trocal	4.6
The best manufacturers of plastic windows in the premium segment	1	MONTBLANC	4.9
	2	Deceuninck	4.8
	3	Plafen	4.8
	4	Salamander	4.8
	5	THE JUICE	4.7
	6	WDS (Window Door Systems)	4.6
	7	Panorama	4.5
	8	Kaleva	4.5
	9	Krauss	4.4

The best manufacturers of plastic windows in terms of price-quality ratio

The average domestic consumer selects plastic windows of the budget or average price range for their homes. It is worth noting that thanks to the creation of joint ventures in Russia, the windows of leading foreign brands have become available. The experts highly appreciated the products of the following manufacturers.

Veka

Rating: 4.9

Leadership in our ranking provided the German company VEKA with several advantages over competitors. First of all, it is worth noting the dynamic increase in volumes on the Russian market. The company came to our country in 1999, but in such a short time managed to bypass experienced manufacturers. It was possible to regain a part of the domestic market through the use of high-tech equipment, strict control at all stages of production and cooperation with Russian partners.

The logical result was the receipt of a European RAL certificate, which confirms the high quality of products. Now the company has focused on the release of window systems of class "A". The entire model range is reliably protected from the effects of any weather phenomena and is suitable for any climate.

Rehau

Rating: 4.8

One of the most uncompromising competitors for the winner of the rating is the well-known company from Germany Rehau. A large manufacturer has its own laboratories in which new models are developed daily. But only a small part of the samples will be further approved and put into mass production. Therefore, the search for ideal designs of window systems continues without stopping.

Rehau is famous for its well-established production cycle, where each stage is supervised by experienced supervisors. The dictatorship of technology has allowed to minimize the percentage of marriage. This led to lower costs for dismantling, warranty repair and re-installation. However, to maintain high quality products without lowering the price is not enough to increase sales.

KBE

Rating: 4.7

Another German manufacturer, KBE, can boast the most affordable prices.The company focuses on the purse of the average Russian buyer, while maintaining good quality profiles. A very diverse and range of window systems. The company offers windows for both buyers of the southern regions, and for residents of the Far North. To reduce the final price for the window profile, KBE organized the full production cycle in Russia. Therefore, the low price applies not only to the profile, but also to the accessories.

The experts gave the manufacturer only the third place in the rating for flaws in the windows of the Russian assembly. First of all it concerns the quality of plastic, which eventually turns yellow.

Proplex

Rating: 4.7

Reasonable prices and full adaptation to the Russian climatic conditions are offered to the buyer by the Austrian manufacturer Proplex. Experts highly appreciate the quality of plastic, which has the strength and reliability. Over time, PVC profile does not turn yellow, its technical parameters also remain unchanged. Therefore, the manufacturer has many customers who install windows in apartments and private houses.

To reach the top three leaders of the company rating did not allow outdated appearance of window profiles. On the one hand, it allows you to keep a low price. But many potential buyers, evaluating the design of the windows, prefer other manufacturers. In addition, Proplex does not have an international quality certificate, which prevents the promotion of products outside Russia.

Trocal

Rating: 4.6

The oldest European manufacturer of plastic windows is considered the German company Trocal. The first PVC profiles were released back in 1954. Since then, production facilities have been updated and improved more than once. The advantages of the windows of this company experts consider the unique strength, rigidity and resistance to deformation. Does not cause complaints from users and the design of window units. The entire model range is distinguished by a certain sophistication, which is rarely found among budget systems. In general, the company deservedly falls into our rating.

In the reviews, consumers point to a number of minor flaws. They did not allow the manufacturer to rise above. Ice formation at -17 ° С is noted, hooks for anti-mosquito nets are not distinguished by reliability.

The best manufacturers of plastic windows in the premium segment

The best indicators of reliability, durability, heat and sound insulation demonstrate plastic windows premium. Buying them is justified not only in the construction and repair of offices or administrative buildings, but also in the construction of private houses. The best manufacturers in this segment today are the following firms.

MONTBLANC

Rating: 4.9

The Russian company MONTBLANC is a relatively young player in the domestic market. But for ten years of activity, the manufacturer has managed to create 2 large modern enterprises and its own scientific base. Thanks to modern technology and high quality of raw materials, the output is the production, the durability of which reaches 60 years. MONTBLANC windows are distinguished by their elegant appearance, the profile and beadings have rounded corners. The Russian brand boasts a developed dealer network, which allows you to build up your customer base.

The consumer is offered 7 different profiles, each of them is designed for specific climatic conditions.Despite the lack of a quality certificate of the international standard ISO, the company deservedly becomes the winner of the rating.

Deceuninck

Rating: 4.8

One of the largest producers of plastic windows in the world is the Belgian concern Deceuninck. It was founded in 1937 and, by its degree of fame, a European manufacturer compares favorably with Russian brands. Today, the company is in the TOP-3 in the world market of PVC windows. In Russia, a joint venture was created, which managed to celebrate the prestigious award for the development of a new glass unit "Favorite Space". One of the main advantages of Deceuninck window systems is the availability of certificates of quality of international standards. But the flip side of the coin was the high level of prices for products, which significantly limits the use in Russia.

The experts gave the Belgian-Russian manufacturer second place for the appearance in the range of budget line of windows. But while they are inferior to competitors, both in design and in quality.

Plafen

Rating: 4.8

The Austrian company Plafen was among the top three manufacturers of premium-quality plastic windows. The quality of double-glazed windows of this company suits the most picky buyers. The catalog has 5 categories, which have a letter designation. But the main feature of the manufacturer was the decoration of profiles for different types of wood. Such a move made it possible to give the windows a more expensive look, and it becomes easier to choose the right color for the interior. The durability of products Plafen is not less than 60 years, with high-quality installation, consumers do not notice frost penetration or drafts.

Many buyers are deterred by the high cost of window systems, so the Austrian manufacturer focuses on selling windows to Russian business.

Salamander

Rating: 4.8

Close to the top three rankings located famous German brand Salamander. Window blocks from this manufacturer are among the best in the world. Neither the experts nor the consumers have any complaints about the quality of the products. The profile is given a 5-year warranty, and the durability of windows is more than 40 years. The entire line differs white glossy surface. It was the PVC compounding that became the business card of the manufacturer. Over time, the plastic does not fade and does not yellow. Since there are no micropores on the surface, the windows are not afraid of either dust or smoke.

The only drawback that did not allow the company to rise higher in the rating was a large number of clones. Counterfeit products are made in an artisanal way, due to which the buyer has a high probability of finding a fake in the house.

THE JUICE

Rating: 4.7

The appearance of the company "Samara Window Constructions" was promoted by the German concern Profine. Co-production has been organized in Russia since 1999. SOK uses all the achievements of the famous European concern, which has its own production under the KBE brand. Samara windows have a good level of reliability, they can serve for a long time when properly installed. Experts consider the company promising in terms of development, as the range of profiles and customer base is constantly growing. The company actively cooperates with other manufacturers of window systems.

To become the leader of our rating, as well as the domestic market, Samara Window Constructions is still hampered by one significant flaw. The plastic turns yellow after several years of use.

WDS (Window Door Systems)

Rating: 4.6

Not so long ago, plastic windows under the WDS brand (Window Door Systems) appeared on the Russian market. A young Ukrainian company organized the production of PVC profiles in 2006, and now it is aggressively promoting its products in the former Soviet Union. The company deliberately headed for the development of the markets of its neighbors, well aware of the particular climate and financial capabilities of people. The quality of windows was appreciated by experts and consumers, calling them the most enduring.

WDS offers a good assortment, which is represented in the domestic market in 6 batches. Each of them has a unique design, while they are easy to install and operate. The low position in the ranking is due to a limited distribution network. While the zone of action does not extend beyond the Moscow region and the regions adjacent to it.

Panorama

Rating: 4.5

Quite a long experience of production and sales in the Russian market has a company Panorama. For 16 years, the manufacturer from St. Petersburg has been offering consumers a high-quality PVC profile. Experts note the optimal combination of rigidity, appearance, sound and heat insulation. Special comfort in the house or apartment is provided by 5- and 6-chamber windows. At the same time, the manufacturer manages to offer buyers reasonable prices. It should be noted, and the company's work in accordance with the requirements of the concept of "Environmental friendliness and safety."

While sales limit passive marketing policy. The service companies of the company are not distinguished by their quickness, and in order to learn about the technical characteristics of windows, consumers have to independently extract information from consultants.

Kaleva

Rating: 4.5

The Russian company Kaleva stands out from its competitors with a complete production cycle. Prompt manufacture of windows allows the client to reduce the waiting time for his order. In addition, the manufacturer independently develops new PVC window designs. The number of representative offices of the company has exceeded 80, including the capital and regional centers. Experts note the focus of employees on comfortable customer service.

Despite the developed dealer network, sales are slowly growing. One of the reasons is the poor-quality installation of window units in certain localities. Because of this, there are negative reviews, you have to spend extra time and money to replace windows. The head office has not yet been able to clean up the remote dealerships, so the company occupies a low position in our ranking.

Krauss

Rating: 4.4

Despite the fact that the quality of plastic windows of the Russian company Krauss is at a high enough level, the brand closes our rating. Experts note the manufacturer’s bias towards the southern regions of the country. Perhaps, the sharpening of PVC windows under a warm climate is explained by the location of the production site (Krasnodar). Narrow specialization does not allow the company to demonstrate a variety of profiles.It is worth noting the use in the production of environmentally friendly materials, so the products comply with the requirements of the international standard of safety.

Several spoils the overall impression of the window systems thin seal. Users note that dust accumulates over time and drafts are formed. You can solve the problem by replacing the sealing elements.

---

Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before buying, you should consult with a specialist.