12 best pumps for well

Many owners of country houses use water from a well. The well pump becomes the important device for the organization of water supply or watering. From the parameters of the pump and reliability depends on the comfort of living in a private house or at the cottage. And in the summer heat, this electric device is able to save many plants from death in the garden. Today in the Russian market there is an abundance of pumps of domestic and foreign production. They differ in price, design, and performance. To choose the most suitable option, you should heed the advice of experts.

How to choose a pump for a well

1. First of all, there should be a correspondence between the pump performance and the capacity of the well. This factor is especially important for old water sources, where, after filling containers of 0.5-1.0 cubic meters. m requires a long pause.
2. There is no sense in pursuing high productivity even if few consumers use water. For example, two adults, taking a shower every day, will not be able to pour out more than 5-6 cubic meters of water. m per month.
3. But with the height of the water supply the situation is reversed. It is not enough to measure the maximum length of the line, it is important to take into account the number of floors and the bends of the aqueduct.
4. Since water is taken from the bottom of the well, a strainer will be a necessary accessory for the pump. It will not only clear the supplied water, but also prevent accelerated wear of pump parts.
5. Work "dry" is not allowed for any water pumps. Therefore, users are often tied to a well in order to shut down the unit in a timely manner. To facilitate the fate of the owners allow the circuit breakers. They are float or electronic type.
6. Modern automation, which some manufacturers complete their products, becomes a useful functional content if the homeowner adheres to the concept of "smart home".
7. During watering the garden and the garden, it is important not to overheat the motor. Some models have overheating protection that will automatically turn off the pump when the high temperature of the motor is reached.

In our review hit the 12 best pumps for the well. In determining the winners, experts' opinions and feedback from domestic consumers were taken into account.

Table of advantages and disadvantages - which is better pump or pump station for a well

Type of pump	Virtues	disadvantages
Submersible	+ silent work + wide range of immersion depth + reliability and durability + unpretentiousness to water quality	- more complex installation and connection - ideal tightness of the case is required - easy prey for thieves
Surface (pumping station)	+ possibility of installation indoors (under lock and key) + simple connection + ease of maintenance + visual observation of work	- loud noise - limitation on the depth of immersion (up to 9 m) - limited performance

Rating of the best pumps for the well

Nomination	a place	Name of product	price
The best submersible well pumps for water supply	1	Pedrollo NKm 2/5	34 488 ₽
	2	Grundfos SB 3-45 AW	22 126 ₽
	3	GILEKS Water Cannon 150/60 A	10 140 ₽
	4	UNIPUMP ECO FLOAT-3	9 288 ₽
	5	GARDENA 6000/5 Comfort	22 395 ₽
	6	DAB DIVERTRON 1200 M	17 350 ₽
Best Well Watering Pumps	1	Lavor EDP-5000	2 490 ₽
	2	ZUBR NIP-240-25	2 260 ₽
	3	LIVHIDROMASH Malysh-M BV 0.12-40 16m	1 700 ₽
	4	ELITECH NVG 300 (10 m)	2 115 ₽
Top Surface Well Pumps	1	Hammer NAC 1000A	6 699 ₽
	2	Whirlwind PN-370	2 240 ₽

The best submersible well pumps for water supply

To provide the house with clean well water, a productive pump is required. He must not only lift the water column from the depth, but also pump it through the entire water supply system. Most often additionally installed hydroaccumulator, which allows you to have some water. Due to this, the pump turns on less often, but it works longer. The experts selected a few good models.

Pedrollo NKm 2/5

Rating: 4.9

The Italian pump for the well Pedrollo NKm 2/5 successfully combines such important parameters as a powerful head (90 m), a large depth of immersion (20 m) and a good flow capacity (4.8 cubic meters / h). For their universality of use, the experts gave the model the first place in the rating. The manufacturer has equipped its product with anti-vibration supports, automatic inlet valve, water control sensors. The high price is due to the exceptional quality of the materials used. Most of the parts, including the case, are made of high-quality stainless steel (AISI 304).

The engine can work for a long time without overheating. The user can adjust the water flow using a special valve. There are no particular complaints from domestic homeowners, except for the high price.

Grundfos SB 3-45 AW

Rating: 4.8

For the organization of water supply in the house where 3-4 people live, the Grundfos SB 3-45 AW pump is perfect. The model is developed in Denmark, and is made in Italy. Experts note the high quality of the device, in this component it is not inferior to the leader of the rating. But the technical parameters look somewhat more modest. The maximum head is limited to 45 m, the capacity is 3 cubic meters. m / h, and the depth of immersion does not exceed 10 m.

The user does not have to monitor the water level in the system, the device is equipped with automatic. Also, do not be afraid for the cleanliness of the water in the well. A filter element made of stainless steel will prevent tiny sand particles from entering the pump for a long time.

GILEKS Water Cannon 150/60 A

Rating: 4.7

The most powerful engine (1.94 kW) is equipped with a pump GELEX Water Jet 150/60 A. Due to this the capacity reaches 9 cubic meters. m / h The maximum pressure is 60 m, and the pump can be lowered to a depth of 30 m. Despite the affordable price, the domestic manufacturer has equipped its product with protection against dry running, a float switch and a filter. Experts confirm the compliance of the actual technical characteristics specified by the manufacturer in the passport. The model is located on the third place in the rating, because users have a number of complaints about the work of the pump.

Along with the positive qualities during operation identified and disadvantages. This is a high power consumption and voltage drop in the network when turned on.

UNIPUMP ECO FLOAT-3

Rating: 4.6

Among competitors the pump for a well of UNIPUMP ECO FLOAT-3 is allocated with the lowest price. It can be used to supply water from a well or open reservoirs. The pump is equipped with a starting capacitor, there is engine overheating protection. Thanks to a special bottom base the risk of pump clogging is reduced, a reliable barrier to sand and dirt is created in the form of a mesh filter.With regard to technical parameters, it is worth noting the possibility of deep immersion of the pump (20 m), while the maximum pressure is limited to 49 m, and the capacity is 5.1 cubic meters. m / h

If we analyze user feedback, we can conclude that, constructively, the model could count on a higher ranking position. But there are certain complaints about the assembly.

GARDENA 6000/5 Comfort

Rating: 4.5

The submersible well pump GARDENA 6000/5 Comfort is notable for silent operation. It can be used in wells up to 13 m deep. At the same time, the maximum pressure does not exceed 45 m, and the productivity is 6 cubic meters. m / h The experts highly appreciated the electronic type of the switch, as well as the fastening cable 15 m long. To prevent sand from getting into the pump, the manufacturer equipped the product with a stainless steel filter.

If you compare with the leaders of the rating, the model loses not only in technical characteristics and price. Users note that the pump is not repairable. The durability of the pump leaves much to be desired, so after the end of the warranty period, you can remain without water in the house for a long time.

DAB DIVERTRON 1200 M

Rating: 4.4

The pump for a well of DAB DIVERTRON 1200 M belongs to devices like "installed and forgot". Thanks to automation and electronic switch, the pump can be used in the concept of "smart home". However, modest specifications are suitable for water supply to 2-3 tenants. At one o'clock the pump can pump 5.7 cu. m of water from a well with a depth of up to 12 m. At the same time, the maximum pressure is limited to 48 m. Experts attribute the ease of installation and ease of connection to the advantages of the device. With it, it is possible to adjust the flow of water without the use of a hydraulic accumulator.

During operation, domestic consumers had to face some problems that prevented the pump from occupying a higher position in the rating. Due to poor-quality sealing occurs failure of the motor.

Best Well Watering Pumps

Special qualities should have a well pump for watering the garden. Since it has to work for a long time, the presence of overheating protection becomes imperative. At the same time, the pump should create a head for efficient spray spraying. Here are a few time-tested instruments.

Lavor EDP-5000

Rating: 4.9

The best pomp for watering a garden or vegetable garden in our rating is the Lavor EDP-5000 model. The pump is capable of pumping slightly polluted water from both the well and other containers. The immersion depth is 5 m, but the device surpasses its competitors in performance (5 cubic m / h). The Italian well pump is silent, it has dry run protection and a float switch. Experts gave the first place to the pump for economical power consumption and a large number of positive reviews.

Users praise the model for the optimal combination of price and quality, good water purification, built-in filter, and reliable operation. It is possible to fully concentrate on watering, automatic controls the water level.

ZUBR NIP-240-25

Rating: 4.8

The tested design of the vibration brook was taken as a basis by the designers, creating the ZUBR NPV-240-25 model. The pump can sink for 3 m, pumping water at a distance of 60 m. The capacity of the unit is 1.44 cubic meters. m / h, which is enough for watering the backyard.The experts gave the second line to the Bison rating for low power consumption (240 W), reliability and durability. He concedes the leader in performance and equipment.

Domestic summer residents pump for the well is in steady demand. Users admire the unpretentiousness of the device, with its help some craftsmen clean wells, pumping out dirty water. Only in the absence of water can the unit be put out of action.

LIVHIDROMASH Malysh-M BV 0.12-40 16m

Rating: 4.7

The main purpose of the pump for the well LIVHIDROMASH Malysh-M BV 0.12-40 is watering gardens and orchards. With the help of a vibration device you can organize an irrigation system with a maximum length of the line up to 60 m. A small electric motor is able to pump up to 1.5 cubic meters per hour. m well water. The immersion depth of the pump is 3 m. Since the model has an upper water intake, it is impossible to prevent the water level from dropping to 40 cm.

The advantage of the pump, according to experts, is a quieter operation than that of similar in design products. It was not possible to beat the leaders of the rating due to problems with build quality. Also, users say not the most reliable operation of the device.

ELITECH NVG 300 (10 m)

Rating: 4.6

The ELITECH NGV 300 pump (10 m) is enough for several summer seasons. With it, you can get water for drinking or organize a system of irrigation of the infield. The attractiveness of the pump is a low price. Even in the event of theft, the owner will not grieve for the loss. As for the technical characteristics, the model is not much inferior to the leaders of the rating, delivering water at a speed of 1.4 cubic meters. m / h at a distance of up to 55 m. And in the depth of immersion (5 m), the model is superior to some expensive counterparts. The experts focused on a long electric cable (40 m), due to which it would not be necessary to use an extension cord.

Low position in the rating of the pump due to negative reviews of some users. They are dissatisfied with the build quality and overheating after 5 minutes of work.

Top Surface Well Pumps

Surface pumps for a well have their advantages. They are easier to maintain and monitor the work. You can put the pump indoors, preventing theft. Experts have chosen two suitable units.

Hammer NAC 1000A

Rating: 4.9

The centrifugal surface pump type Hammer NAC 1000A is the winner of our rating for several reasons. First of all, experts note high performance. With a motor power of 1 kW per hour, the pump pumps up to 4.6 cubic meters. m of water. The next advantage of the model is its versatility. In addition to immersion in a well, you can successfully extract water from wells or open reservoirs. It is allowed to immerse the pump nozzle to a depth of 8 m, while raising the water column the device is capable of up to 45 m. High quality of workmanship and reliability can be judged by a 5-year warranty from the manufacturer. To protect the motor from overheating, there is thermal protection.

Users are satisfied with the build quality and product performance, quiet operation and unpretentiousness.

Whirlwind PN-370

Rating: 4.8

Somewhat inferior to the leader of the rating in the performance of the domestic pump WHIRLWAY PN-370. Its maximum capacity is limited to 2.76 cc. m / h, and the maximum pressure is 30 m. The manufacturer completed the pump with a small electric motor (370 W). On the one hand, there is a loss in performance, and on the other, the weight of the unit is only 5.4 kg. The depth of suction reaches 9 m.

In assessing the operation of the pump for the well, consumers have no consensus. Some users praise the pump for low price and quiet operation, ease of connection and operation. Other owners have a paint peeling, a strong heating of the motor, a discrepancy between the actual parameters stated.

---

Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before buying, you should consult with a specialist.