11 best waterproofing

Waterproofing is used to protect against moisture in every home. With its help it is possible to prevent the ingress of groundwater in the basement, to protect the walls and roof from rain. Sometimes moisture seeps through the smallest cracks, giving homeowners a lot of trouble. In a humid environment, pathogens, such as fungus and mold, actively proliferate. Today in the construction market, waterproofing is popular, which allows you to make a seamless protective layer. With the help of our experts, it will be possible to choose the most appropriate means to protect the house from moisture.

How to choose a waterproofing

Application Method. There are several options for applying a waterproofing coating.

1. Rolled waterproofing is the old method of waterproofing the layer. Ruberoid, film and membrane materials fall into this group. Their main disadvantage is the complexity of laying and sealing the seams.
2. Obmazochnaya waterproofing is a liquid or pasty material that is applied with a conventional brush. This option of protection against moisture is good simplicity of application and a seamless coating structure.
3. Penetrating waterproofing is the most modern means of dealing with moisture. The liquid composition penetrates the concrete structure and fills all the pores and voids.

The composition of the product. Manufacturers make waterproofing from both natural and synthetic materials.

1. Bituminous mastic is obtained from petroleum, it is considered a natural product. The main advantage of the natural composition is affordability. By cons experts include fragility, rapid aging and destruction.
2. Polymeric materials are characterized by high elasticity, resistance to ultraviolet radiation, durability. A clear disadvantage is the high cost.
3. Combined waterproofing successfully combines the advantages of natural and synthetic bases. Manufacturers combine cement and polymers, obtaining high-quality mastic at an affordable price.

Scope of application. A homeowner has to protect various structures from moisture, both inside and outside the building. In each case, a product with a set of specific qualities is required.

1. For the foundation, rolled materials (roofing felt, profiled membrane) are most often used outside, and the internal surfaces are treated with a coating waterproofing.
2. In the case of waterproofing a wooden house it is required to paint a colorless mastic. It is applied in 2-3 layers after wood treatment with an antibacterial primer.
3. Waterproofing in shower rooms or pools should not only prevent the penetration of moisture into the base, but also to withstand pressure from water or humans. Good results are demonstrated by cement-containing coating compositions.
4. A special case is the protection from moisture of heated floors. Since the coating experiences temperature drops, the waterproofing must be not only heat resistant, but also flexible. Well behaved in such conditions products based on synthetic.

In our review got 11 of the best waterproofing. All these products can be purchased at local stores. The rating took into account the opinion of the expert community and consumer reviews.

Top waterproofing rating

Nomination	a place	Name of product	price
Best waterproofing waterproofing	1	KIILTO Fiberpool 14 kg	5 400 ₽
	2	Ceresit CR 166 24 kg + 10 l	5 090 ₽
	3	Weber (Weber.tec) 822 gray 8 kg	2 290 ₽
	4	PLITONIT Hydroelast 16 kg	4 040 ₽
	5	Knauf Flahendicht water dispersion 5 kg	1 645 ₽
	6	Waterproofing acrylic Bitumast 7 kg	1 640 ₽
	7	Mastic rubber-bitumen Bitumast 4,2 kg / 5 l	610 ₽
The best universal waterproofing	1	Quelyd Stop Water 6 kg	4 380 ₽
	2	Hydrolast C 15 kg	1 460 ₽
The best penetrating waterproofing	1	Penetron for waterproofing concrete surfaces 10 kg	3 770 ₽
	2	BASF MasterSeal 501	3 850 ₽

Best waterproofing waterproofing

For protection from moisture of concrete, brick and cement foundations, an optimal waterproofing is best suited. It is applied in several layers, forming a seamless coating with a thickness of 1-3 mm. Such products are used in sealing pools, basements and repair of local areas. Experts identified several quality products.

KIILTO Fiberpool 14 kg

Rating: 4.9

Reliable protection of the premises from moisture is provided by KIILTO Fiberpool coating waterproofing. With the help of Finnish mastic is recommended to handle floor and wall bases. Scope of application is wide enough, only in saunas where the temperature exceeds 60 ° C, it is not recommended to use the product. The composition can be applied to concrete, gas and foam blocks, cement-sand screeds, moisture-resistant plywood, drywall, as well as old tiles and PVC coating.

Experts note the economical consumption of waterproofing, on the walls about 0.8 kg per square meter, on the floor - up to 1.0 kg. After drying, a dark green layer is formed, re-apply mastic is allowed after 6 hours of exposure. The product becomes the winner of our rating, except for the price users have no complaints about it.

Ceresit CR 166 24 kg +10 l

Rating: 4.8

The waterproofing of reinforced concrete structures is ensured by the waterproofing of Ceresit CR 166. This two-component composition is made at a Russian enterprise, so the price of the composition (24 kg + 10 l) is cheaper than 14 kg of KIILTO Fiberpool. The manufacturer managed to combine the two bases, cement and polymer. As a result, the product received a number of unique properties. Experts note the environmental friendliness of waterproofing, which is especially important for interior spaces. The composition can be used not only to form a waterproofing layer, but also as a finishing coating in order to protect steel reinforcement from corrosion.

Users flattering about the technical characteristics of the composition. The second place the product receives only the need to mix the two components.

Weber (Weber.tec) 822 gray 8 kg

Rating: 4.7

Weber waterproofing (Weber.tec) 822 has a completely synthetic base. The composition is intended for the device of elastic protection of the bases against moisture. Experts note high water resistance, which allows the use of mastic in very wet and wet rooms. Drying time ranges from 10-15 hours. It is allowed to immediately glue the tiles on an insulated surface. The scope of application is not limited to the interior, you can make insulation on the balcony or terrace. The manufacturer also recommends to arrange insulation on heated floors.

The structure gets to the leading three of a rating for ease of drawing, moisture resistance. At the same time, the ratio of price and consumption did not allow to beat the competition.

PLITONIT Hydroelast 16 kg

Rating: 4.7

A continuous layer of waterproofing can be created using the elastic mastic PLITONIT Gidroelast.The structure is intended for processing of the concrete bases, a bricklaying, the plastered surfaces, gypsum cardboard. It is possible to form a waterproofing layer on the interior and exterior walls, floors, and heated systems. Experts appreciated the occupancy of the butt gaps, which allows to seal the corner joints, plastic and metal pipes. It is important that in the future the design is not subjected to dynamic loads.

Users are satisfied with the ease of application, waterproofing properties. The product is located one step away from the winners of our rating due to the unstable viscosity in different tanks. In addition, when carrying the handle often come off.

Knauf Flahendicht water dispersion 5 kg

Rating: 4.6

As a basis for the manufacture of waterproofing Knauf Flahendiht manufacturer chose a water dispersion of artificial latex. The result is a product that is not afraid of damp and wet rooms, such as a bath and shower room. The German product is designed exclusively for indoor use, in which it is inferior to the leaders of our rating. The composition is perfectly placed on gypsum plaster, sheets and screeds, mineral bases (cement and lime-cement slabs, porous concrete). The manufacturer does not recommend the use of waterproofing in pools, wells or tanks with water, where there is a constant load.

The product is located outside the podium of our rating due to consumer feedback. They had to face fake waterproofing that discredits the Knauf brand.

Waterproofing acrylic Bitumast 7 kg

Rating: 4.5

Affordable price is different waterproofing acrylic Bitumast. Mastic of blue color is created for protection against moisture bathing and shower rooms, bathrooms and pools. The product fits well on concrete, cement-sand, brick and wooden bases. Experts emphasize the strength of the elastic layer. The composition can be used to seal the joints of the ventilation pipes, chimneys, as well as the sealing of joints or cracks. The advantages of waterproofing include environmental safety, lack of odor and high adhesive ability.

Users flatter about the moisture resistance of the composition, the simplicity of its application. The product did not allow a limited scope to rise higher in our rating. It is not suitable for outdoor use and for tanks with a constant load of water.

Mastic rubber-bitumen Bitumast 4,2 kg / 5 l

Rating: 4.4

Another waterproofing of the Russian manufacturer falls into our rating. Bitumast rubber bitumen mastic can be used not only to increase the moisture resistance of concrete and wooden substrates. The composition is recommended for the protection of steel structures from corrosion, pipelines or fittings. The product is based on crumb rubber, insulating bitumen and white spirit. According to experts, this is one of the most economical options for waterproofing, both in price and consumption (0.5 l / sq. M). The composition contains not only a corrosion inhibitor, but also an antiseptic. Due to this layer is not affected by microorganisms.

The most significant disadvantage of mastic is exclusively external use, which affected the final position in our ranking.

The best universal waterproofing

Every owner in the house should have a universal waterproofing.With its help, it is possible to eliminate water leaks, both in various foundations of the house (basement, roof, walls), and on the balcony, terrace, pool. Specialists liked the following compositions.

Quelyd Stop Water 6 kg

Rating: 4.9

The most widely used in the construction industry is the universal Quelyd Stop Water mastic. Experts advise this waterproofing when other methods do not bring success or require large investments. The product is created by innovative SMP-technology. With its help, it is possible to make waterproofing of the roof, walls, basements, showers and bathrooms. The composition is suitable for concrete, stone, metal, wood and many other materials. Experts note high resistance to ultraviolet, rain, high humidity. Waterproofing ranks first in our ranking.

Users managed to appreciate the waterproofing ability of the German mastic, the versatility of its application. The disadvantages of the product include a long drying time (1-3 days).

Hydrolast C 15 kg

Rating: 4.8

The product called Gidrolast C falls into our rating for the possibility of creating a thin (1.5-2 mm) and very elastic coating. It does not crack over time, is not afraid of shrinkage and dynamic loads. The composition is made on the basis of cement and polymers. Experts are surprised by the adhesiveness of waterproofing, it strongly clings to concrete, brick, drywall and other building materials. The manufacturer recommends using mastic in pools and tanks with water, on terraces and balconies, in basements and foundations. Before applying, it is enough to remove all exfoliating elements from the base and moisten it.

According to users, Gidrolast S copes with waterproofing different bases. Only the consumption of material is quite high. Therefore, the composition is located on the second position of the rating.

The best penetrating waterproofing

High efficiency is demonstrated by modern penetrating waterproofing. It fills the pores and voids in the base, displacing moisture to a depth of 20 cm. The use of such a composition eliminates the priming operation and increases the strength of the structure. Here are some top-quality products.

Penetron for waterproofing concrete surfaces 10 kg

Rating: 4.9

The penetrating waterproofing Penetron has a unique ability to self-heal chips, pores and cracks. Dry capillary composition is designed to protect concrete and reinforced concrete with cracks up to 0.4 mm from moisture. Experts particularly highlight the water resistance and frost resistance of the composition. After application to the substrate, it retains the vapor permeability of concrete, and is not afraid of mechanical impact. The advantage of waterproofing is that after applying moisture resistance goes to the concrete base. In this case, the structure can be processed both from the inside and from the outside.

The product becomes the winner of our rating for the preservation of the most important qualities of concrete, such as vapor permeability, strength and durability.

BASF MasterSeal 501

Rating: 4.8

BASF MasterSeal 501 penetrating waterproofing has a cement base. The ready-to-use dry mix contains special aggregates, organic additives and chemically active substances to penetrate the concrete structure. Protection against moisture is achieved due to the growth of sparingly soluble crystals. The manufacturer recommends using the composition for waterproofing tanks, swimming pools, water treatment facilities, dams, cooling towers, water pipes, etc. Experts included the product in our rating for manufacturability, good adhesion, and non-toxicity.

Users are complimentary about the moisture resistance of penetrating waterproofing BASF MasterSeal 501. Some difficulties arise only with the preparation of the working solution.

---

Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before buying, you should consult with a specialist.