10 best welding semiautomatic devices

High quality connection of several metal products in a single unit can provide welding semi-automatic. Today, these devices are used not only by professionals, but also by home or garage masters. Moreover, even a novice can successfully use individual welders. The principle of semi-automatic welding is based on a molten arc of wire in an inert gas environment. A protective atmosphere is required to prevent premature oxidation of the surfaces being welded. When it is required to join steel parts, then semi-automatic welding in the environment of carbon dioxide is most often chosen. But for the connection of products from aluminum alloys applied arc welding in argon. For different types of work, experts advise choosing a device with a set of specific qualities. First of all, you should pay attention to the following criteria.

Criterias of choice

1. One of the important values ​​that characterizes the efficiency of the welding machine is maximum current. However, this indicator should be combined with the constant inclusion rate, which is expressed as a percentage. For example, a device with a PV of 60% needs to be switched off for cooling more often than a device with an indicator of 80%. This fact must be taken into account by professionals when long continuous work is required.

2. Power welding machine in our country has two sides of the coin. From one point of view, the higher the power, the more productive the device. And from the second side, a more powerful welder is able to withstand large voltage drops, which is often observed in the household network.

3. Polarity reversal function helps to use not only the mode of welding in the atmosphere of carbon dioxide, but also to move to work with flux wire. If in the first case a "plus" is attached to the burner, then for work with doped alkali metals, a "minus" is applied to the burner.

4. In some cases, some additional functions become useful. For example, the arc welding mode allows you to connect massive steel structures when the wire does not provide the necessary reliability of the joint.

Our review includes the best welding semi-automatic. The following factors were taken into account when compiling the rating:

1. multifunctionality;

2. reliability and durability;

3. price;

4. expert opinion;

5. consumer reviews.

Rating of the best welding semiautomatic devices

Nomination	a place	Name of product	price
The best low cost welding semiautomatic devices	1	Elitech IC 220P	25 420 ₽
	2	Aurora OVERMAN 160	20 900 ₽
	3	Foxweld Invermig 160 combi	18 730 ₽
	4	Resanta SAIP-200	22 170 ₽
	5	Interskol ISP-160 / 5.9	15 100 ₽
The best professional welding semiautomatic devices	1	Aurora SPEEDWAY 175	35 800 ₽
	2	Svarog PRO MIG 200 SYNERGY (N229)	48 560 ₽
	3	Fubag INMIG 200 Plus	28 460 ₽
	4	SAROG MIG 250 Y (J04)	55 700 ₽
	5	Cedar MIG-175GD	33 000 ₽

The best low cost welding semiautomatic devices

Among the budget welding semiautomatic devices there are several models that are distinguished by reliability and functionality. They are often called semi-professional, and they are used in the repair of cars in garages or for domestic purposes. Our experts have selected some interesting models.

Elitech IC 220P

Rating: 4.8

One of the best low-cost welding semiautomatic devices, according to experts, is the Elitech IS 220P model.The main advantage of the welder was resistance to voltage drops. With a lower limit of 160 V, the device maintains good performance and low power consumption (up to 5.4 kW). The current is 180 A, but with effective cooling, the PV is 80%. It is very comfortable to work with wire up to 1 mm thick. Therefore, the device is in high demand among garage masters, for which he won the rating.

It should be noted that the manufacturer cares about usability. On the inclined panel are voltage regulators and wire feed speeds. Using a welding machine is comfortable, both standing and sitting.

 

Aurora OVERMAN 160

Rating: 4.7

An excellent semi-automatic inverter type is the model Aurora OVERMAN 160. The current strength in this device reaches 160 A, and the duration of the inclusion is 60%. The device can operate in the voltage range of 187-253 V, reaching a power of 4 kW. Such qualities as reliability and durability allowed to get to the second line of the rating for the welder. Even if technical problems arise, you can get support without any problems.

The device differs in unpretentiousness, it is not afraid of dusty and small-sized rooms. In reviews, users are flattering about the quality of the weld, but in the event that there are no increased requirements for processing speed.

 

Foxweld Invermig 160 combi

Rating: 4.6

When choosing a budget universal welding machine, experts paid attention to the model Foxweld Invermig 160 combi. It was not the high current (160 A) and the impressive PV rate (60%) that helped him get into our rating. These parameters are not always required when working in garage conditions. Among the advantages, experts point out the convenient control of the device; digital control allows precise and fast adjustment. The device is quite economical, when operating in MMA mode, it consumes no more than 4.6 kW, setting the regulator to the MIG position can hope for energy consumption to the level of 3.8 kW.

The inverter is not afraid of voltage drops, and the kit has a heated gearbox. This makes it possible to work effectively in an unheated garage during the cold season.

 

Resanta SAIP-200

Rating: 4.5

The SAIPA-200 model received the greatest popularity among welding semi-automatic machines of the Resant brand. The device has a large current margin (200 A) with a PV of up to 70%. The welder does not overheat when working with wire up to 1 mm thick. The strengths can not be attributed affordable price, and in the reviews slip negative assessments. Therefore, the semi-automatic failed to reach the prize troika.

Can not boast the device and the wealth of equipment. Many users note a short electrical wire (2 m). Does not paint the manufacturer and interchanged the scale on the instrument panel. Instead of voltage, the regulator adjusts the speed of the pull. Therefore, it is necessary to remember these unpleasant nuances during operation.

 

Interskol ISP-160 / 5.9

Rating: 4.5

A common brand in Russia among welding machines is Interskol. The model ISP-160 / 5.9 is made very simple and understandable for ordinary consumers. Experts also note high build quality, which allowed the product to get into our rating. Ordinary craftsmen say the convenient work with the use of wire is not the best quality.Favorably different apparatus and ease of replacement coil.

It is very simple to set the current strength on the welder, as well as the wire feed speed. The device adequately copes with voltage drops, stably working with minimum current values. Inverter allows you to perform both semi-automatic and manual arc welding. The power of the device is 5.9 kVA with an on-time of 80% and a current of 145 A.

 

The best professional welding semiautomatic devices

To solve serious problems in the production are called professional welding machines. These semiautomatic machines are characterized by high performance and durability. They can be multifunctional or narrowly focused. It all depends on the characteristics of production. In our review there are several popular models.

Aurora SPEEDWAY 175

Rating: 4.9

A popular semi-automatic welding machine among professionals is the Aurora SPEEDWAY 175 model. The device allows using such popular types of welding as MMA, MIG / MAG, TIG. The current is regulated in the range of 10-175 A, and the output voltage is 187-253 V. The power of the unit is limited to 4.8 kW. The welding machine deservedly became the winner of our rating.

Professionals point out such positive properties of the model as high efficiency (80%), degree of protection IP23S, low weight (12.8 kg). He is able to work smoothly in a wide temperature range (-20 ... + 50 ° C). For operator convenience, there is a VRD function, thanks to insulation class F, high safety is achieved during operation.

 

Svarog PRO MIG 200 SYNERGY (N229)

Rating: 4.8

High marks from experts earned welding semi-automatic Svarog PRO MIG 200 SYNERGY (N229). The device ranked second in the ranking due to its versatility. The polarity is changed using the switch knob, the device can operate in MMA mode (with stick electrodes), as well as using an argon torch (TIG DC mode). Affects professionals and the maximum rate of PV (100%) at a current of 160 A.

Another advantage is the device Svarog PRO MIG 200 SYNERGY. This is a competent arc control scheme that changes the mode of operation of the welder. When operating in argon, both push-pull and four-stroke modes are possible. The manufacturer confirms the high quality of manufacturing with a five-year warranty.

 

Fubag INMIG 200 Plus

Rating: 4.7

A sample of European quality is a semi-automatic welding machine from Germany Fubag INMIG 200 Plus. Experts consider the combination of simplicity and durability to be the main reason for its popularity among domestic welders. Among classmates, the unit stands out for high power, but a low level of PV (20%) did not allow it to rise above third place in the ranking. The device can work both in semi-automatic mode with a wire of 0.8 mm (current 90 A), and in the variant of arc welding (current 170 A). In the course of long work the device does not overheat.

Professionals distinguish such a feature of the device as mechanical polarity switching. As for the control system, the kit contains a standard power switch, mode switch, current regulator and wire feed speed.

 

SAROG MIG 250 Y (J04)

Rating: 4.7

The semi-automatic welding machine SVAROG MIG 250 Y (J04) got into our rating due to exceptional reliability. His capabilities were highly appreciated in the Welding Production Attestation Committee.The device got into our rating not only for high reliability, but also for the powerful current that is generated in the process of semi-automatic mode (MIG / MAG). With a current of 250 A and a voltage of 323-437 V, it is capable of producing 9.2 kVA (PV 60%). The wire feed speed varies between 2 ... 15 m per minute. Additional modes in the model are not provided, which is not allowed to bypass the prize winners.

The capabilities of this machine can be appreciated only by professional welders. In order to fully realize the advantages of the device, the operator is required to have experience and high skills.

 

Cedar MIG-175GD

Rating: 4.7

Looks great in terms of functionality semi-automatic welding Cedar MIG-175GD. It can weld metal in semi-automatic mode, with the help of electrodes or in argon. It is easy to transfer cables when changing polarity. The unit has software control, to set the optimum operating mode, there is a multifunctional regulator. This is especially useful with frequent changes in welding modes. With semi-automatic operation, professionals appreciate the ability to manually adjust the curvature of the current-voltage characteristic. This makes it possible with the same success to brew both massive parts and products from sheet iron.

The device ensures comfortable operation in the MMA mode with a current of 175 A. With a PV of 60%, it will be optimal to use electrodes 2-3 mm thick.

---

Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before buying, you should consult with a specialist.